PitPinTrack day riders’ news & tips, pinned daily

Tank slapper: what a steering damper cannot fix

ChampSchool's answer on whether a damper prevents a tank slapper is maybe. It does not fix the cause, and a violent one can knock the brake pads back from the disc.

3 min readBy PitPin Desk

Steering damper

Will a damper prevent a tank slapper? ChampSchool's answer is maybe. A hydraulic damper forces fluid through a restricted passage: very little resistance to slow steering, much more to fast movement. It takes energy out of the oscillation.

It does not fix the cause. The school lists possible causes: tyre pressure, a worn or damaged tyre, wheel alignment or balance, loose steering head bearings, wheel or swingarm bearings, changed suspension setup or ride height, luggage and a passenger. More damping is not automatically better either: wound up too far, the bike becomes very heavy to steer and can be reluctant to finish the corner.

The next braking zone

For track riders, a violent tank slapper can knock the brake pads back from the disc, so the lever may have significantly more travel than you expect. After a big one, approaching the next braking zone, the school says you might want to check the lever early and make sure the brake is actually there.

Weave and wobble

ChampSchool (Yamaha Champions Riding School) separates two kinds of instability. A weave is usually a slower movement that involves more of the whole motorcycle, in roll, yaw and side to side. A wobble is a much faster oscillation centred on the steering. When it gets violent enough for the bars to swing through a lot of travel, riders call it a tank slapper, and ChampSchool calls it the death wobble.

The school says motorcycle dynamics research generally puts wobble at somewhere around four to 10 cycles per second. Your brain and arms cannot make deliberate steering corrections that fast, and trying can make it worse.

How it starts

A tank slapper usually needs a disturbance, and it can be tiny: a bump, a pebble, a seam in the surface, or the front simply going light. ChampSchool says you see it a lot with wheelie landings, poor suspension setup or the rider. Normally geometry and tyre forces bring the steering back in line unnoticed. Under the wrong combination of conditions the movement grows instead. The wheel deflects, returns, overshoots, and every correction creates another one.

Hard acceleration out of a corner is a typical case. Weight moves rearward, the front tyre is very lightly loaded, and a bump can let the surface deflect it. When the tyre reconnects pointing even slightly away from the direction of travel, it has to correct the difference.

The rider is part of the steering

If you hold your upper body up on the bars while accelerating hard, you add tension to the steering, and the natural reaction to moving bars is to grip harder. ChampSchool's answer is to support your body with your legs and core, anchored to the bike, and leave your hands free to work the controls.

If it happens

Do not try to out-steer it, and do not lock your elbows and stiff-arm the bike. Keep your lower body anchored and get your torso lower and forward if possible. Then reduce the throttle smoothly. Do not snap it shut, do not grab a lot of front brake and do not try to accelerate your way out.

Afterwards

After a serious wobble on the street, pull over somewhere safe. On track, come into the pit lane. Check tyres, pressures and wheels (a wheel weight may have come off), bearings, the steering head, suspension settings, sag, ride height and damper settings. Note where it happened. Always in the same place on track, only under hard acceleration, or at a certain speed on smooth tarmac: each tells you something different.

Sources