PitPinTrack day riders’ news & tips, pinned daily

Precision first: CanyonChasers' order for rider skills

CanyonChasers puts bike placement first, then vision, smooth inputs, brake pressure and, last, posture. To be precise you have to slow down, so precision sets your entrance speed.

3 min readBy PitPin Desk

The wrong order

The CanyonChasers coach, who says he has coached riders since 2000, sees riders who put in the miles and are still nervous in corners. They are not getting better, or at least not as quickly as they had hoped. Too often they work on the wrong things, or maybe even the right things in the wrong order. They worry about a short shift while their braking is not as good as it could be, and they cannot put the bike where they want it in every single corner.

How you sit, a match or blip shift, and where your toes are on the pegs are real skills. A perfect downshift does not do much if you cannot stop in time or run wide. Fundamentals are where the bike goes, where your eyes go and how smoothly you use the controls. Most of what is out there, schools and much of YouTube included, is incremental, he says. He thinks the best way is to reverse engineer what the best riders do and work out the order to build it, an idea he was first introduced to at ChampSchool.

The order he teaches

  1. Bike placement and precision: lines and apexes, putting the bike exactly where you want it and getting it pointed out of every single corner confidently.
  2. Vision and focus: reference points, scanning and a plan for every corner or junction.
  3. Smooth, precise, linear inputs on the brakes, throttle and bars: loading the tyre before working it, using the first and last 5% of the control to manage weight transfer.
  4. Brake pressure and its adjustability: adding and taking away small amounts. Because speed equals radius, more brake pressure will pull the bike into a tighter arc and easing off front brake pressure will relax the radius.
  5. Posture: using your body to reduce and control lean.

Entrance speed and vision

Riders treat precision as one of the least important things, as long as they stay on the road, when it is probably the most important. They do not necessarily lack an apex or a line, and going faster than they should is when they give up putting the bike exactly where it needs to be.

Most schools start with vision and a suitable entrance speed. He is not arguing with either. Too much speed is genuinely dangerous. The advice is too vague to measure and too hard to repeat, and "suitable" does an awful lot of work. To be precise you have to slow down, so precision sets your entrance speed for you. Your eyes then have something specific to look at and to look for.

You look for those points sooner and further down the road. Your sense of speed drops while your actual speed comes up, without trying to go fast. He calls that about the closest thing to free speed the sport offers.

Posture and the line

Posture is what he is asked about most. If the bike is not exactly where they want it, posture is a bit of a distraction, potentially even a dangerous one: a knee and lean angle instead of the line.

When riders work on the fundamentals, especially in this order, that nervousness about leaning usually just fades. The list is circular. Even halfway through a ride, you may notice your precision slipping, and that is the cue to go back to it. His question for the next ride is whether you are putting the bike exactly where you want it in every single corner. If not, that is your work, and everything else can wait.

Sources