PitPinTrack day riders’ news & tips, pinned daily

Grip comes from load: why an unloaded front tyre tucks

CanyonChasers coach Dave says grip is a force you build with load, and that most front-end crashes start with an unloaded front.

3 min readBy PitPin Desk

Many riders picture grip as a fuel gauge: the tyre arrives with a fixed amount, you try not to use it all, and if you run out you crash. Dave, the founder of CanyonChasers and a Champions Certified Coach with Yamaha Champions Riding School, calls that the most dangerous misunderstanding in street riding. In his account, grip is a force you create with load.

Chemical grip and mechanical grip

Chemical grip comes from the rubber compound. You choose the compound, the construction and the intended temperature range at the parts counter. On the bike, the only lever left is heat, and you keep the tyre in its working window mostly through correct pressures. He notes that race rubber is often much harder than street rubber so it survives extreme heat without melting, which is why it feels like a brick when cold.

Mechanical grip is the tyre keying into the microscopic peaks and valleys of the asphalt. Under load the rubber deforms into that texture, and a bigger contact patch gives it more surface to grip and more area to shed heat. The way you change this in real time is how much weight you press into the contact patch, and how smoothly.

F = μN

Friction force, F, equals the coefficient of friction, μ, times the normal force, N. You bought μ at the parts counter. N, the load on the contact patch, is the part you control every second you ride.

Coasting into a corner

The popular idea is that an unloaded tyre has the most grip in reserve, so you coast into a corner to save it. Dave's answer is that this spare grip stays theoretical until load presses the tyre into the road. Coasting usually means the suspension goes slack, the front gets light and the contact patch shrinks, right when you need stability most.

He puts it this way: "The most dangerous motorcycle is an unloaded one."

Why the front tucks

In nearly twenty years of coaching, he says, the most common front-end crash has the same root cause: an underloaded front. The rider gets back on the gas too soon or too abruptly, or lets go of the front brake too suddenly while still leaned, and the front unloads while it still needs support. The contact patch shrinks, mechanical grip falls away, chemical grip alone is not enough to hold the bike up, and the front washes out fast. He says the rider stopped creating grip at the worst moment, and that it is almost never a rider using too much of it.

Trail braking

Braking and cornering spend the same front-tyre budget, so if you add one, you have to give back some of the other. In his description, trail braking is a gradual handoff from braking force to cornering force that keeps the front loaded and stable the whole way in. It is not dragging the brake lever until the apex. Give the weight a moment to transfer and build the contact patch before you brake hard. Avoid adding brake pressure or throttle at the same moment you add lean.

Throttle on the exit

Wait until you can see the exit, reduce lean, and only then feed in throttle to move weight onto the rear.

Four habits

Load the front with smooth, progressive brake pressure to build the contact patch before you ask for maximum braking. Trade brake for lean gradually, as a handoff rather than a release, so the front stays loaded and stable. Wait to finish the direction change, then reduce lean before any heavy throttle. Avoid coasting.

Sources